After a leak vaping device may have e-liquid on its mouthpiece, in its tank, on airflow openings, and around the outside surfaces of the device. Cleaning the device after a leak can help prevent adhesion of liquid and ease assessment of the device’s condition. It is important to consider the type of vaping device since the reusable devices are easier to clean than the disposable ones. Particular care should be taken when a leak is observed on the battery or electrical parts.
Inspecting the Device Before Cleaning
Prior to cleaning, it is advised to make sure there are no damages to the device. If the device has cracks, broken parts, faulty seals, swollen battery, oxidized or corroded areas, and liquid around the charging port or other openings, it should not be used or charged. If liquid has reached the battery section of the device, it is advisable to replace the battery. Do not try to open a battery compartment of a vaping device if it is not designed to be opened.
Before cleaning a vaping device, one might want to assess why it has started to leak. For instance, there may be issues with a seal on a reusable vaping device, a faulty or improper installation of a mouthpiece, or build-up on sides of the tank. Determining the source of a leak and damaged parts can be useful in deciding on the extent of cleaning required and whether the device needs to be replaced.
Preventing Future Leaks
A regular examination of a vaping device can help ensure that it is not damaged. If the device is a disposable one, it is better to replace it with a reusable device. Regular cleaning and inspection of a reusable device, following the manufacturer’s instructions, can help avoid further leaks. Disposable vapes devices should only be opened according to the instructions, since improper opening of the device may damage its parts and cause leakage.
In case a damaged or deteriorated part needs to be replaced, the device must be taken to a professional repair service. If it is hard to find a specialist, one can check online or ask for the recommendation of a friend who uses vape products. However, in the case of a disposable device, it is safer to replace it. Choosing the vaping product from a reliable online vape retailer will help to ensure that the customer knows the characteristics of the device and the manufacturer’s specifications. Nevertheless, when replacing a part or cleaning a vaping device, it is necessary to follow the manufacturer’s instructions.
Cleaning the Exterior Surfaces
A soft dry cloth can be used to wipe the outside surface of the device, including the buttons, seams, airflow openings, and charging port. To remove adhesive e-liquid from the surface of the vaping device, a wet cloth can be used on surfaces that are not sensitive to moisture. It is necessary to make sure that the cloth does not dip into the openings or get liquid on the electrical parts of the device. The device should be turned off and disconnected from the charger during cleaning.
It is important to pay particular attention to the areas of the device where liquid can pool overnight. For instance, the bottom part of a tank and the area around the mouthpiece may need special care. Using a cotton swab can help remove liquid from smaller openings and irregular surfaces. After wiping the vaping device, it is needed to let it dry completely before continuing to the next step of cleaning. In case the exterior of the device has dried liquid, it would be easier to check if a leak has occurred after cleaning.
Cleaning Reusable Device Components
If a vaping device is a reusable one, it can be cleaned according to specific instructions from the manufacturer. Provided that the device allows disassembling, the tank with liquid can be detached from the battery section and wiped with a dry paper towel. Then, the liquid holding part of the device and the battery section should be wiped with a dry cloth. The manufacturer’s wipe-clean instructions can be followed to wash the parts of the device. The device should be assembled only after it is completely dry.
The battery section of a vaping device should be handled with particular care since the liquid must not get inside the workings of the battery. Therefore, instead of pouring any liquid over a battery section, it can be wiped with a damp tissue. If any of the device’s elements have been moistened and one is not sure how to proceed with cleaning, it is better to follow the manufacturer’s instructions or replace the battery. The vaping device might need to be replaced if liquid has got inside the battery compartment and electrical parts.
Checking the Device After Cleaning
After cleaning, the vaping device must be examined once more to ensure that all traces of e-liquid have been removed from the surface of the device, and the internal parts are dry. The tank and mouthpiece, connections, battery, and other parts that hold liquid must not be wet to prevent a bigger leak in the future. If it is noticed that the vaping device still has liquid on the surface or if it starts leaking during charging, it needs to be replaced.
When buying a vaping device at an online vape store, as noted one should know which products one buys since some products are designed to last longer while others are disposable. If one buys disposable vapes, it is best not to dismantle it. Therefore, the instructions included with the vaping device should be read first before trying to remove liquid or clean the vaping device.
